LAKE TAHOE, Calif. (Wednesday, March 05, 2014) – The 2015 Tahoe and Suburban are engineered to deliver a quieter, more-controlled ride with improved steering and braking feel – a combination that offers customers the capability of a truck and the driving experience of a luxury vehicle.
“Suspension, steering and brake enhancements, including several new technologies, work collectively on the 2015 Chevrolet Tahoe and Suburban to produce a more solid-feeling, smoother and quieter ride,” said Jason Petric, vehicle system engineer. “We’ve taken the ride and handling characteristics and noise isolation to higher levels and passengers will immediately notice the stronger, more isolated feel – and these new SUVs’ more-direct and responsive handling will surprise and delight drivers.”
Tahoe and Suburban’s driving experience is built on a stronger, fully boxed, perimeter frame that supports payload and trailering capability that body-frame-integral crossovers and SUVs can’t match. Additional contributors include:
A firmer foundation
The fully boxed, high-strength-steel-intensive ladder-type frame on the Tahoe and Suburban enables an optimal balance between hauling capability, noise and vibration isolation and safety. The frames for each vehicle are similar in design and construction, but the Suburban’s is longer, to support its 35 cm (14-inch) longer wheelbase and roughly 50 cm (20-inch) greater overall vehicle length.
The frame design and construction incorporates much of the technology and materials used on the 2014 Silverado pickup, including more than 75 percent high-strength steel and new body mounts that enhance ride and handling.
To optimize strength and refinement, three sections comprise the frame: front bay, mid bay and rear bay. The front frame bay uses hydroformed side rails. GM pioneered the use of hydroformed frame rails for full-size trucks and SUVs nearly 15 years ago. The process uses highly pressurized fluid to shape the frame rails, making them stronger and lighter than comparable welded multi-piece components.
A four-point, front-axle mounting system is integrated with the front bay and uses strong axle mounting brackets that, combined with the front bay’s stiffness, significantly reduces vibration over previous models.
New, boxed side rails of the frame’s middle bay are constructed of two pieces of high-strength steel welded to form the sturdy box design, which supports two stiffness-enhancing cross members. Strength is also built into the frame by slipping the front bay’s rails inside the boxed sections of the middle bay 240 mm (9.4 inches ), creating a very rigid structure that resists bending.
The rear-bay boxed rail section is joined to the middle bay with an overlapping, shingle-type construction. They offer enhanced strength over the previous model, with a robust fuel tank cross member and a stronger, single-piece spare tire cross member. The rails are thicker where carrying strength is needed and tapered toward the rear to reduce weight and improve ride characteristics.
Stronger body structures and new shear-style body mounts
The 2015 Tahoe and Suburban feature more robust body structures mounted on the stronger frames, contributing significantly to their more solid feel and a quiet, smooth ride. The bodies incorporate greater use of high-strength steel and ultra-high-strength steel, which also contributes to improved crashworthiness.
In the Tahoe and Suburban, high-strength steel and ultra-high-strength steel is used in the A-pillars and B-pillars, the inner roof rails and additional reinforcements for roof-crush protection. It is also included in the rocker panels, door rings and other underbody components.
Additionally, a number of structural reinforcements and other components help stiffen the body, for noticeably reduced vibrations on rough surfaces. For example, strong, diagonal braces were added underhood to better tie the front end to the body. Further, an enhanced instrument panel support beam, which spans the width of the interior under the dashboard, features a new beam-to-floor brace that is four times stronger than before. It’s used with stronger instrument panel mounting brackets and a thicker tubular steering column jacket to enhance the steering column’s stiffness, reducing vibration that could otherwise be felt in the steering wheel.
New, shear-style body mounts complement the stronger body structure to significantly improve stiffness and contribute to a smoother ride. The mounts are bolted to the frame and provide dampening in both compression and rebound, meaning the tension generated during compression is released in a controlled manner, similar to a shock absorber. Previous body mounts worked in compression only. Also, engineers were able to more precisely tune the mounts for dampening in multiple directions – up/down, cross-vehicle and fore/aft – for reduced body shake.
The new SUVs’ stiffer chassis enabled more precise tuning of the front and rear suspensions, for smoother, more-confident performance than previous models – and less vibration and shake, particularly on harsh terrain. The incorporation of more lightweight materials and revised rear suspension geometry also contributes to a more responsive feel.
Three suspension packages are offered:
All models – 2WD and 4WD – feature an updated coil-over-shock independent front suspension design, with forged aluminum upper control arms and cast-aluminum lower control arms on select models. They are 5 kg (12 pounds) lighter per side and 10 percent stiffer than comparable steel components.
The front suspension also uses new cast-aluminum steering knuckles that are 4kg (nine pounds) lighter per side than previous models and deliver comparable stiffness, along with coil springs that are up to 30 percent stiffer than before, for more confident handling. Enhanced jounce bumpers, spring isolators and top shock mounts are additional suspension upgrades that also contribute to ride quality and noise isolation.
At the rear, Tahoe features a five-link coil-spring suspension design, which enables optimal ride and handling through more precise tuning. Lateral stiffness was increased at the frame-side joint of the lateral link with the addition of a cross-axis ball joint, in place of the previous rubber bushing. The result is a greater feeling of steering precision.
A wider rear track – 1,744 mm (68.7 inches) – and half-inch wider wheels improve Tahoe and Suburban’s stability and ride smoothness. The new geometry also contributes to flatter, more confident-feeling cornering, particularly when hauling heavy cargo or towing. The wider wheels reduce tire flexing and new-design twin-tube shock absorbers (ZW7 rear) and mono-tube shocks (ZW7 front / Z85 front and rear) improve low-speed damping for a smoother, more controlled ride.
Additional chassis and suspension features include:
Efficiency-enhancing electric power steering
All Tahoe and Suburban models feature new electric variable-assist power steering, which improves overall vehicle handling and reduces steering effort at low speeds. Because there is no engine-driven pump, electric power steering also saves fuel and eliminates the maintenance associated with hydraulic power steering.
The steering calibrations are tailored for the Tahoe and Suburban’s respective wheelbase lengths, while the variable assistance enhances overall handling with reduced steering effort in parking lots and a higher rate on the highway that provides a more solid, direct and on-center feel.
Longer-lasting Duralife™ brakes
Four-wheel disc brakes with four-channel ABS are standard on all models and feature new Duralife™ brake rotors that were introduced on the 2014 Silverado. They offer up to double the service life of conventional rotors and enhance braking performance, thanks to a GM-exclusive manufacturing process that protects against rust that, over time, can lead to steering wheel shudder.
The process involves super-heating the rotors to more than 560 C (1,000 degrees F) for an entire day in a special oven, where the nitrogen-rich atmosphere promotes nitrogen atoms to bond to the rotors’ surfaces, hardening and strengthening them.
A revised brake apply system complements the new brakes with improved feelings of firmness and smoothness that give customers confidence when they step on the brake pedal. With it, an enhanced brake vacuum pump improves braking capability through greater brake system boost, while the brake pedal assembly itself is lighter, for a more uniform, linear feel throughout the entire pedal travel range.
In short, when the driver steps on the brake pedal, the response is firm, smooth and confidence-inspiring.
The SUVs also feature Auto Grade Braking, which uses engine and transmission controls to slow the vehicles on a long downgrade, helping maintain vehicle speed and reducing the need for the driver to use the brakes.
Electronic vehicle-control technologies
StabiliTrak electronic stability control system is standard on all Tahoe and Suburban models, and works in concert with the brake system to provide more precise and controlled ABS stops, greater traction and excellent cornering stability. It also incorporates rollover mitigation technology, which anticipates tip-up conditions – such as fishtailing – on a flat road surface and rapidly applies brake pressure to help reduce the likelihood of a rollover.
Trailer sway control is standard and works with StabiliTrak to provide an added measure of confidence when towing. It senses conditions of trailer sway and, without input from the driver, intervenes with braking and/or reduced engine power to bring the trailer under control and keep it on its intended path. The system will use electric trailer brakes when a trailer is plugged into the standard harness.
The SUVs also offer an integrated trailer brake controller and hill start assist, which maks towing easier. The trailer brake controller allows the driver to adjust the amount of output available to the electric trailer brake and to manually apply the brakes, which is very useful with customers who use their truck regularly to tow loaded and empty trailers back to back.
With hill start assist, the brakes hold for about 1.5 seconds on grades of 5 percent or greater when the driver takes his or her foot off the brake pedal, preventing rollback for a more confident take-off on hilly terrain – especially with a trailer.
About Chevrolet in Canada
Founded in 1911 in Detroit, Chevrolet is now one of the world's largest car brands, doing business in more than 140 countries and selling more than 4.5 million cars and trucks a year. Chevrolet provides customers with fuel-efficient vehicles that feature spirited performance, expressive design and high quality. More information on Chevrolet models can be found at www.chevrolet.ca, on Facebook at http://www.facebook.com/chevroletcanada or by following @ChevroletCanada on Twitter.
# # #